V-ringen type VB (vlakke rug & groef)

The V-ring is a rubber-elastic shaft and bearing seal that is mounted against a counterface. The special feature of this seal is the axial sealing lip. The dynamic sealing takes place axially and not radially, as with other shaft seals. The V-ring is used to provide a simple, effective seal against water, dirt, and dust, among other things. The V-ring has low friction, resulting in less power loss. When using the V-ring, there is no need to machine a special groove. The V-ring still provides sealing even if the shaft is out of round or runs eccentrically. A single V-ring can be used for multiple shaft diameters. Material NBR; Min. Temp: -30 Celsius; Max. Temp: +100 Celsius; Material: NBR; Hardness: 70 Shore; Resistant to, among other things, mineral oil and fats, water, alcohol, and acetylene. FPM; Temperature range -20 to 200 degrees; Material: FPM; Hardness: 80 Shore; Resistant to, among other things, synthetic and hydraulic fluids, hydrochloric acid, diesel oil, and gasoline. EPDM; Min. Temp: -40 Celsius; Max. Temp: +160 Celsius; Material: EPDM; EPDM rubber is highly resistant to acids, brake fluid, bases, and hot water. Additionally, it is ozone- and UV-resistant. This material is not suitable for applications with fats and mineral and animal oils. Silicone; Min. Temp: -60 Celsius; Max. Temp: +220 Celsius; Material: Silicone; Resistant to bacteria, fungi, aging, weather influences, various chemicals, and ultraviolet light. The silicone material has good electrical insulating properties and superior aging and ozone resistance. Due to its high degree of physiological inertness, silicone rubber is also used in medical and food Neoprene; Min. Temp -35 Celsius; Max Temp: +110 Celsius; Resistant to, among others, mild acids, coolant, silicone oil-grease, and water. Much care has been taken with the flexible sleeve so that the pressure of the sealing lip against the shaft surface is very low. Assembly The V-ring is easy to install. The V-ring is pulled over the shaft and brought into place using, for example, a screwdriver.

Filter
Page 1 of 7
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
Display:
Sort:
V-ring VB 1000 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1020 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1040 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1060 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1080 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1100 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1160 FPM Viton® (Hoge temperatuur)
V-ring VB 1160 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1180 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1220 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1260 FPM Viton® (Hoge temperatuur)
V-ring VB 1260 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1280 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1300 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1325 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1350 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1375 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1400 NBR / Rubber / Nitrile
Shipment within 2-3 days
V-ring VB 1425 NBR / Rubber / Nitrile
Shipment within 2-3 days
Display:
Sort:
Page 1 of 7
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
Filter